Choose a Mansfield fence company that measures your yard on site, writes the picket grade on the quote and has the crews to hold your start date. Johnson Fence does all three, with over 100 crews in the field and a free on-site estimate.
Most homeowners here have already met the other kind of company: the fence that failed too soon, the quote that left out the grade, the crew that never came back. Each section below takes one of those problems and shows what to ask for.
Pick a Mansfield fence company that measures on site and writes the grade down
Pick the company that measures your yard on site, names the picket grade on a written quote and has enough crews to hold the start date. At Johnson Fence, the salesperson meets you on site, measures the linear footage and confirms fence type and picket grade.
That order matters because footage and grade set the price. The price runs per linear foot, based on the footage taken at your property and on which picket grade, #1 through #3, you pick. We quote the grade by name, so you can hold two bids side by side and see whether they cover the same wood. Request at least three itemized estimates and compare labor, post quality (wood or metal) and warranty terms.
Skipped follow-through is the usual way a bad job starts. A one-star Google review from February 16, 2026, about a different Texas fence company, reads: “Never heard from him ever again despite numerous texts and calls to the business”. A company that measures first and puts the grade in writing gives you something to hold it to.
What should you check with Mansfield and your HOA before you hire?
Mansfield requires a fence permit before you build a new or replacement wood privacy fence of five feet or taller. The city’s fence application sets the maximum height for a residential privacy fence at eight feet.
Repair or replacement of less than 50% of the total linear footage of an existing wood privacy fence is exempt from that requirement. A permit is always required for any fence construction taller than six feet, so a tall replacement never gets the exemption. Ask every company you interview whether your height triggers a permit.
If your neighborhood has a Homeowner’s Association, verify that your chosen design, height and materials comply with its covenants before you sign. City rules and HOA covenants are separate, and passing one does not pass the other. Get the covenant language in hand first, then let the company quote to it.
What fence material holds up in Mansfield’s clay soil and summer storms?
In North Texas weather, with high summer heat and severe storms, cedar on steel posts set in concrete is widely favored over standard pine for longevity and warp resistance. The post matters as much as the picket.
Our fences use pressure-treated framing with cedar pickets. The pickets run from #1 to #3 grade, with the price following the grade, and the grade is named on the quote. Posts are what fail, and new boards on a rotted post cost twice, so ask any company what goes in the ground before you ask about the boards.
When two quotes differ, check the post type first. A low number built on weaker posts means you pay again when the posts go.
What should a Mansfield fence quote spell out before you sign?
A good quote spells out the footage, the picket grade, the post type, the gates and the tear-out of the old fence. Cost depends on fence type, materials, length, gates and site conditions, so a quote that leaves one of those out leaves a price you cannot compare.
Ours names the material grade, #1, #2 or #3, in writing. The footage is the one measured on site.
Market prices give you a yardstick. Pressure-treated pine at six feet runs $18 to $35 per linear foot installed across Texas (Fence Advisors, 2026). Cedar board-on-board at six feet runs $30 to $45 per linear foot installed, and DFW Fence Experts calls it the most common configuration in HOA communities (DFW Fence Experts, 2026). A bid far below those ranges has left something off the page.
Quotes that never arrive are a problem too. A one-star Google review from March 27, 2026, of another Texas fence company, says: “No showing an initial evaluation and quote with no notifications”. Written, itemized and measured on site is the standard to hold every bid to.
How do you check a Mansfield fence company’s license, insurance and reviews?
Ask for proof of liability insurance, and for a license or registration wherever Texas or Mansfield requires one. Then read recent Google reviews for how the company handled a problem rather than only the star count.
Texas has no statewide general-contractor, home-improvement or fence-contractor license. The Texas Department of Licensing and Regulation licenses only specific trades such as electricians and air-conditioning and refrigeration contractors, so a residential fence builder can work statewide without a state license. The City of Mansfield requires electrical, irrigator, mechanical, plumbing and third-party energy contractors to register, and fence contractors are not on that list (City of Mansfield, Permits & Registration). A company that calls itself state-licensed for fencing is claiming a credential that does not exist.
That leaves insurance and reputation as your checks. Several well-reviewed local fence contractors serve Mansfield, each standing out for customer reviews, local craftsmanship and specialization. Look for the review where something went wrong and see what the company did. Vi G. described a rust problem in a June 2026 five-star Google review of a wrought iron job, and wrote: “We had rust damage to 2 posts of our wrought iron fence and we had it replaced. We are very satisfied with the finished work. It was done skillfully and neatly. Office personnel are accommodating. Thanks to you Matt. We highly recommend this company for any wrought iron gate job.”




